How much does it cost to replace windows?
Replacement windows cost about $180 to $1,500 per window installed, averaging roughly $280 to $517. A whole-house job runs about $2,000 to $23,000.
Key takeaways
- Bob Vila cites a per-window average of $280 (range $180 to $409); This Old House reports $517 per installed window.
- This Old House puts the average whole-house project at $7,183 for about 7 windows.
- Bob Vila estimates a 10-window job at $2,000 to $11,500 and a 20-window job at $4,000 to $23,000.
- By material, vinyl and aluminum are cheapest; wood and fiberglass cost the most (both sources).
- Installation labor runs about $100 to $300 per window, per Bob Vila.
Replacing a window costs about $180 to $1,500 installed, with per-window averages of roughly $280 (Bob Vila) to $517 (This Old House). A whole-house project typically runs $2,000 to $23,000 depending on how many windows you replace and the frame material. This Old House reports the average full project at $7,183 for about seven windows. Prices are current as of September 2026 and vary by material, size, glass, and region.
What window replacement costs in 2026
Two reputable cost guides bracket the typical price. Bob Vila reports a national average of $280 per window, ranging $180 to $409. This Old House, drawing on a homeowner survey, reports a higher average of $517 per installed window and $7,183 per project across an average of seven windows. The spread reflects differences in window style, glass package, and how much installation is bundled in. For planning, treat $180 as the low end (small, basic vinyl), roughly $500 as typical, and up to $1,500 for premium fiberglass or large custom units.
| Frame material | Bob Vila (per window) | This Old House (avg per window) |
|---|---|---|
| Aluminum | $75–$400 (avg $275) | $453 |
| Vinyl | $100–$900 (avg $550) | $472 |
| Composite | $300–$1,200 (avg $900) | $513 |
| Wood | $150–$1,300 (avg $800) | $544 |
| Fiberglass | $500–$1,500 (avg $1,250) | $564 |
Whole-house cost by window count
Because most homeowners replace multiple windows at once, the project total matters more than the per-unit price. Bob Vila estimates 5 windows at $1,000 to $5,750, 10 windows at $2,000 to $11,500, and 20 windows at $4,000 to $23,000. This Old House’s survey found the average completed project at $7,183 for about seven windows. Buying in bulk often lowers the per-window price through a single mobilization of the crew.
What moves the price
- Material: Aluminum and vinyl are the least expensive; wood and fiberglass are the priciest. Bob Vila’s fiberglass average of $1,250 is roughly 4.5x its aluminum average of $275.
- Glass package: This Old House prices single-pane at $400, double-pane at $529, and triple-pane at $609 per window; more panes improve efficiency at higher cost.
- Style and size: This Old House found single-hung windows at about $474 and double-hung at about $551; bays, bows, and custom shapes cost more.
- Installation: Bob Vila puts labor at $100 to $300 per window ($55 to $65 per hour); full-frame replacements with rot repair or resizing cost more than insert installs.
- Window count: Larger projects raise the total but can lower the per-window rate.
Bottom line
Expect roughly $180 to $1,500 per window installed, with most homeowners landing near $280 to $517 depending on material and glass. A full-home replacement commonly runs $2,000 to $23,000, with the average project around $7,183. Get itemized, whole-house quotes since material and labor rates vary by region. Figures reflect published cost guides current as of September 2026.
How to save on window replacement
- Replace several windows in one job — contractors give volume pricing, so the per-window cost drops as the count rises.
- Choose vinyl frames, which cost less than wood or fiberglass while still being energy-efficient.
- Ask about insert/retrofit installation instead of full-frame replacement when the existing frames are sound; it’s less labor.
- Book in the off-season and get at least three quotes — installed window prices vary a lot between installers.
- Claim the federal ENERGY STAR tax credit and any local utility rebate on qualifying efficient windows.
- Stick to standard sizes; custom or specialty-shaped windows carry a premium.
- If a window only has a failed seal or broken hardware, repair it rather than replacing the whole unit.
Cost scenarios
Budget ($180): A standard-size vinyl window with a straightforward insert installation can be around $180, especially when several are done at once and the existing frames are still sound.
Typical ($517): A typical installed replacement window runs about $517, covering a mid-range energy-efficient unit and normal labor for one opening.
Premium ($1,500): A large, custom, or specialty-shaped window in a premium material such as fiberglass or wood, with full-frame installation, can reach $1,500 each.
Cost by state
Prices vary by where you live. These estimates scale the national typical ($517) by each state's overall price level, so treat them as a regional guide rather than a quote for how much does it cost to replace windows?.
See all 50 states + DC
| State | Estimated typical | vs U.S. |
|---|---|---|
| Alabama | $459 | -11% |
| Alaska | $529 | +2% |
| Arizona | $521 | +1% |
| Arkansas | $449 | -13% |
| California | $572 | +11% |
| Colorado | $533 | +3% |
| Connecticut | $536 | +4% |
| Delaware | $516 | 0% |
| District of Columbia | $568 | +10% |
| Florida | $535 | +3% |
| Georgia | $498 | -4% |
| Hawaii | $568 | +10% |
| Idaho | $494 | -5% |
| Illinois | $517 | 0% |
| Indiana | $483 | -7% |
| Iowa | $454 | -12% |
| Kansas | $466 | -10% |
| Kentucky | $466 | -10% |
| Louisiana | $456 | -12% |
| Maine | $502 | -3% |
| Maryland | $543 | +5% |
| Massachusetts | $547 | +6% |
| Michigan | $497 | -4% |
| Minnesota | $510 | -1% |
| Mississippi | $450 | -13% |
| Missouri | $470 | -9% |
| Montana | $489 | -5% |
| Nebraska | $466 | -10% |
| Nevada | $517 | 0% |
| New Hampshire | $539 | +4% |
| New Jersey | $563 | +9% |
| New Mexico | $477 | -8% |
| New York | $558 | +8% |
| North Carolina | $488 | -6% |
| North Dakota | $460 | -11% |
| Ohio | $480 | -7% |
| Oklahoma | $454 | -12% |
| Oregon | $534 | +3% |
| Pennsylvania | $504 | -2% |
| Rhode Island | $529 | +2% |
| South Carolina | $485 | -6% |
| South Dakota | $458 | -11% |
| Tennessee | $475 | -8% |
| Texas | $502 | -3% |
| Utah | $511 | -1% |
| Vermont | $506 | -2% |
| Virginia | $523 | +1% |
| Washington | $553 | +7% |
| West Virginia | $463 | -11% |
| Wisconsin | $486 | -6% |
| Wyoming | $479 | -7% |
Regional estimates scale our national typical by BEA Regional Price Parities (2024), an index of overall state price levels — actual variation for this specific service differs. Source: BEA.
Frequently asked questions
How much does it cost to replace one window in 2026?
About $180 to $1,500 installed. Bob Vila cites a national average of $280 per window (range $180 to $409), while This Old House reports $517 per installed window based on a homeowner survey.
What does it cost to replace all the windows in a house?
Bob Vila estimates $2,000 to $11,500 for 10 windows and $4,000 to $23,000 for 20. This Old House found the average completed project at $7,183 for about seven windows.
Which window material is cheapest and which is most expensive?
Aluminum and vinyl are the least expensive; wood and fiberglass are the priciest. Bob Vila lists aluminum around $275 and fiberglass around $1,250 per window on average.
How much of the cost is installation labor?
Bob Vila puts installation at $100 to $300 per window, or about $55 to $65 per hour. Full-frame replacements needing rot repair or resizing cost more than simple insert installs.
Does triple-pane glass cost much more than double-pane?
Somewhat. This Old House prices single-pane at $400, double-pane at $529, and triple-pane at $609 per window. The extra pane improves energy efficiency for a higher upfront cost.
How we estimate this
Every figure on this page is compiled from the public sources cited above and given as a low–typical–high range rather than a single false-precise number. Where costs vary by location we scale the national typical using published state price levels. We recheck figures on a set schedule and stamp each report with the date last verified. We are independent and are never paid to change a number — see how we price things.
